D-G2Q FUEL DISPENSER

D-G2Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose 4.5m

Weight : 215kg.

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

ents on metrological management. The chapter briefly introduces fuel d fuel dispenser ispenser’s metrological management and technical requirements, appraisal related and attentions. Article I Metrological fuel dispenser management and technical requirements In accordance with The Law on Metrology of fuel dispenser’s legal management mainly includes following aspects: Model approval, initial approval, subsequent appraisal and inspection in operation. Model approval refers to an entire test, examination and assessment as to new model’s entire performance. Initial approval refers to assess whether or not the fuel dispenser made by manufacturer in accordance with the model having been ratification through a series of testing, as well as metrological performance with relative metrological rules and regulations. Initial approval really has two phases �- approval combined with factory test, and testing appraisal after installation. Subsequent appraisal is conducted after long time since initial appraisal, from which considerable appraisal period is set down according to related requirements. Periodical appraisal is also regarded as the continued subsequent appraisal. Fuel dispenser’s measuring performance within appraisal period needs to be examined, so filling station should deploy self-check standard instrument (no less than 20L) to examine and inspect. Apart from applied to fuel dispenser approval, JJG443-98 also adapt sample testing and pattern evaluation. Although there are two items of accuracy and flow distance ratio conducted in initial approval and subsequent evaluation, there are other technical parameters different from approval as for fuel dispenser made after passing pattern evaluation, including minimum calculated volume and minimum cubic variable. Several items reference to the pattern evaluation and sampling testing of mechanical hydraulic section of fuel dispenser as followed: Accuracy testing The testing’s purpose is to define the flow curve and verify the tolerance scope in which the allowed maximum tol fuel dispenser

58 58 58 58　　 fuel dispenser 58 58 58 58 58　　 58 58 58 34 34　　 fuel dispenser 34 38　　 TextLine 7F 11　　 TextLineValue 80 0F 41 75 74 68 20 Auth : 102030　　 23 20 3A 20 31　　IFSF POSEPS ImplementationGuidelines - Revision - 20060510　　 10052006 Page 93 of 105　　 Confidential　　 Name Tag Length Data Comment　　 30 32 30 33 30　　 TextLine 7F 0F　　 TextLineValue 80 0D 4F 44 4F 4D 45 ODOMETER 1234　　 54 45 52 20 31　　 32 33 34　　 TextLine 7F 17　　 TextLineValue 80 15 52 45 53 50 20 RESP CODE 000 REF 559　　 43 4F 44 45 20　　 30 30 30 20 52　　 45 46 20 35 35　　 39　　 TextLine 7F 02　　 TextLineValue 80 00　　 TextLine 7F 0F　　 TextLineValue 80 0D 43 55 53 54 4F CUSTOMER COPY　　 4D 45 52 20 43　　 4F 50 59　　 TextLine 7F 02　　 TextLineValue fuel dispenser

d city streets at night was caused by hordes of drunkards rolling out fuel dispenser of pubs and clubs at the same time and fighting for the same taxi home. They cited the wartime experience in Australia, w fuel dispenser here an early closing time had led to a phenomenon dubbed the “six o clock swill� in which people drank themselves silly against the clock. The hope was that, once hours were relaxed, Britons would adopt more civilised, continental habits, sipping delicately at glasses of Chablis rather than downing ten pints. Were the optimists or the pessimists right? Since the law was changed, around two-thirds of licensed premises have extended their opening times, most by an hour or so. (Fewer than 1% were granted a 24-hour licence.) That smoothed the 11pm and 2am chuck-out peaks and filled in some of the troughs. And Armageddon did not come to pass. Local authorities in several large, lively cities, including Birmingham, Nottingham and Manchester, report that the streets are no more disorderly than before. One popular drinkers street in Birmingham has seen a dramatic drop in crime (although that may also be because businesses, fearing the worst, paid for street wardens). In London, most strikingly, there has not been a single month since the drinking laws were relaxed when more violent crimes were recorded than in the same month a year earlier. That is also true in Westminster (see chart), where many of the capital s pubs and clubs are clustered. Overall levels of violence in the borough have fallen by 12% in the ten months since November 2005, compared with the same period a year before. The police remain cautious (or perhaps, given their opposition to the reforms, sullen) about such positive signs, saying it is still too early to tell what effect liberalisation will have on crime. They point out that local forces have diverted time and money to police late-night drinking, and have been given extra cash by the government. That will run out on Christmas Eve, at which point things may become trickier. fuel dispenser