D-GA4 FUEL DISPENSER

D-GA4 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 310kg

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

but also container, vacuum pump. The hose made according to GB10543 consists of inner rubber layer, enhancing layer, conductible metal line and exterior rubber layer. Whichever hose abided by the requirements of GB/T9081-2001 Fuel dispenser for vehicle and JJG443-98 Fuel Dispenser in terms of safety and accuracy. During operation pay much attention fuel dispenser to protect hose: avoid as much crook as possible; prevent pressure on hose; avoid and reduce abrasion with ground. 4. Connection and seal about pipeline and hydraulic elements Each part of fuel dispenser adopts pipeline connection, dividing into hard type and soft type. In hard type connection steel pipe, brass pipe and aluminum pipe are adopted as pipeline, but in soft type one hose and corrugated pipe. Connected components includes relative elbow jointer, flange and directive jointer. There are following seal types: cone-shaped seal, subulate thread seal, O-ring seal, rubber and asbestos gasket, cork and rubber board, engineering rubber board. According to regulation stipulated in GB/T9081 every fuel dispenser should be conducted sealability testing before leaving factory, no leakage found under normal operation. As replace some parts or found leakage these problems should be paid attention: Cone-shaped seal structure Cone-shaped seal structure also called as expanding jointer, which is composed of pipe with outstretched end, flat spout and outside thread bushing. Sealability is ensured through tightly integration of subulate surfaces. In disassembling or reassembling cone-shaped seal structure pays much attention not to hurt or broken sublatae surfaces, cleaning waste. Thread airproof As disconnection or reassembly thread surface should be kept clean, daubing seal glue or seal belt before installation. O-ring seal Most manufacturers adopts national standard to design O-ring seal, reaching a good sealability. However, some parts is impossible to adopt national standards because of specific structure. Thus, user shoul fuel dispenser d purchase or employ appropri fuel dispenser

Bin8 R(1-3) M　　 (03H) (0-255)　　 Indicates the Release_Token used when the transaction　　 was started.　　 At the end of the fuelling transaction the Release_Token　　 (Data_Id 32 fuel dispenser in FP Database) is stored here.　　 PCD Comment:　　 The PCD will have to store in this Data_Id the release　　 token that it used when this transaction was a current　　 transaction.　　 TR_Fuelling_Mode　　 4 Bin8 R(1-3) M　　 (04H) (1-8)　　 Indicates the fuelling mode used for this transaction.　　 At the end of the fuelling transaction the Fuelling_Mode　　 (Data_Id 33 in FP Database) is stored here.　　 PCD Comment:　　 The PCD will have to store in this Data_Id the fuelling　　 mode that it used when this transaction was a current　　 transaction.　　 TR_Amount　　 5 Amount R(1-3) M　　 (05H) Indicates the money amount of the transaction.　　 At the end of the fuelling transaction the Current_Amount　　 (Data_Id 34 in FP Database) is stored here.　　 PCD Comment:　　 The PCD will have to store in this Data_Id the　　 transaction amount. It is possible that the PCD will have　　 to calculate this value from the received volume and unit　　 price.　　 TR_Volume　　 6 Volume R(1-3) M　　 (06H) Indicates the dispe fuel dispenser fuel dispenser

at will happen when the music stops? Unlike the federal government, America s states do not have the luxury of running up deficits, so they typically set aside money for a rainy day. The National Association of State Budget Officers expects the current year s spending spree to whittle those reserves down from 6.9% of annual expenditures to 4.6%—less t fuel dispenser han half the level before the recession. The states may need those reserves badly. Health-care costs continue to rise, with state Medicaid programmes especially under threat. Many other governors have been playing the same sorts of pension-fund games as Mr Blagojevich. And, sooner or later Congress will have to rein in the federal budget deficit. The states could face a drop in federal funds even as they are handed more duties of care for their own citizens. The incumbents are putting off these sobering thoughts until next year; America s other 23 governors should confront them sooner. © 2006 .  About sponsorship A defenestration at Harvard The Summers also sets Feb 23rd 2006 | WASHINGTON, DC From The Economist print edition The ousting of Larry Summers had more to do with the balance of power on campus than ideology AP No sufferer of fools HARVARD likes to think of itself as the best university in the world. People who didn t go there may beg to differ, but this week Harvard proved that it is undoubtedly a world-beater in one discipline academic back-stabbing. On February 21st Harvard s president, Larry Summers, announced that he is stepping down after just five years in his job, making him the shortest-serving president since Cornelius Felton, who died after two years in office in 1862. Derek Bok, who ran the university in 1971-91, will serve as interim president until a replacement can be found. Mr Summers s abrupt fuel dispenser retirement not only raise fuel dispenser