D-GC88 FUEL DISPENSER

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

other part of pipeline. 3.4. Important notices to maintenance Switch off the power supply to ensure safety; repairing a container to collect pipe oil. Carefully protect the joint face in case that waste goes into inner part when disconnecting and reassembly. Clean all components before reassembly. The tightness of bolt of upper cover should be even, installed catercor fuel dispenser ner. It is suggested to adapt even strength to install other bolts and nuts in case to damage the thread of frame. Article III Measurement transducer The fuel dispenser adapts cubage flo fuel dispenser w meter composed of measurement transducer and indicator device in accordance with the stipulation of metrological regulations on fuel dispenser of P.R.C.JJG443. Measurement transducer convert the cubage signal of oil passed over into digital signal, then into pulse signal via electric sensor. Finally, transmitting pulse signal to indicator device in where the oil volume passed over measurement transducer is indicated. Flow meter generally includes two parts--- measurement and indication, but it is often regard flow meter only has measurement function before t fuel dispenser he new appraisal regulations promulgation. Obviously, the new regulation is more scientific and accurate in the definition of measurement transducer. Measurement transducer is core component of fuel dispenser. The most basic and important technical parameters are measure accuracy, environmental adaptability and reliability. Its performance depends upon structure parameter design, material choice and manufacturing quality. The correctly usage and maintenance of course are the important condition for measurement transducer operation. Domestic fuel dispenser manufacturers now adapt two kinds of measurement transducers that divided by the model of piston. The following will introduce these two kinds ---- metal-piston measurement transducer and soft-piston measurement transducer. Metal-piston measurement transducer This kind of measurement transducer is adapted by most of manufacturer of fuel di

dgeNot　　acknowledge.　　The mechanism used is within the XML tags: RepeatLastMessage is a message that the application sends when　　timing out for the response; the missing response might arrive upon the second request or the request has failed.　　This methodology is not within the Device Proxy messages because such messages are specifically addressing　　exception fuel dispenser s.　　When an error happens the response message can be delivered only when the address of the source is available;　　the response message will contain the error detail but the header attri fuel dispenser butes will be zeroed because potentially　　corrupted or not available. This helps and simplifies error handling.　　4.6.2 Flows and error-handling　　The following connection types are supported:　　CardServiceRequests ServiceRequests from POS to EPS.　　CardServiceResponse ServiceResponse from EPS to POS.　　DeviceRequest from EPS to POS or from POS to EPS　　DeviceResponse from POS to EPS or from EPS to POS　　The supported connection types will be performed over different TCP connections.　　 1. The first TCP connection (Channel 0) connecting f fuel dispenser rom POS side listening from EPS side - will be used　　 for the CardService- and ServiceRequests from the POS to the EPS-Client.　　 The CardServiceResponse or ServiceResponse from the EPS to the POS will be transmitted over the same　　 TCP connection.　　 2. The second TCP connection (Channel 1) listening from POS side connecting from EPS side - will be　　 used for the DeviceRequests from the EPS-Client to the POS. The DeviceResponse from the POS to the　　 EPS will be transmitted over the same TCP connection.　　 3. The third TCP connection (Channel 2) - connecting from POS side listening from EPS side - will be used　　 for the DeviceRequests from the POS to the EPS-Client and the DeviceResponse from the EPS to the POS.　　In some implementations 1 and 3 given above may use

b terminals that were connected to a mainframe and that Mr Ozzie and his friends playfully used to communicate, by exchanging what would today be called e-mails and instant messages. This experience so captured his imagination that he devoted his next three decades to writing software that enables “collaboration� His single biggest breakthrough came in the 1980s, when fuel dispenser Mr Ozzie personally wrote a million of the first 3.5m lines of code for the first successful collaboration software, Lotus Notes. At a time when nobody had heard of the world wide web, Lotu fuel dispenser s Notes already offered “workspaces�not unlike today s wikis. Mr Gates watched with his usual mixture of emotions towards innovations by others—envy and grudging admiration. These probably gave way to anxiety when IBM, Microsoft s partner-turned-enemy, bought Lotus in 1995 for $3.5 billion. Mr Ozzie soon parted with IBM and again set out to take collaboration to the next level, this time by using new ideas about decentralised networks between people and their computers. This approach would subsequently be called “peer-to-peer�and has since been made fa fuel dispenser mous by Napster, a method for “sharing�music, and Skype, a service for free internet telephony. Mr Ozzie s company, Groove, was not a commercial success this time, but Mr Gates and others in the industry nonetheless saw the idea and recognised its potential. Last April Messrs Gates and Ozzie joined forces. One reason why Mr Gates is so drawn to Mr Ozzie is that, as Mr Gates has said, “Ray is incredible at thinking of the end-user experience,�an area where Mr Gates, whose own genius is weighted towards business strategy rather than software finesse, has a less stellar reputation. Another reason is Mr Ozzie s personality, which is the opposite both of Mr Gates s and Mr Jobs s. Mr Gates has a squeaky voice and sounds perennially on the point of irritation; Mr Jobs pushes his colleagues as Ramses did his pyramid- builders and appears to have a similar self-image. Mr