K-GA FUEL DISPENSER

K-GA FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H) : 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 29

tive bolt made of metal; Take out the metal; Turn the regulative bolt clockwise, each grid reduce 1cm3; Calibrate discharge result used stan fuel dispenser dard gauge instrument, reassemble if accuracy is right. Usage and Maintenance As few in domestic fuel dispenser, the troubleshooting of double piston measurement transducer consult the methods of four-piston measurement transducer or maintain according to the user’s manual pro fuel dispenser vided by manufacturer. Some difficult trouble should consult with special mechanician from factory. Every time o fuel dispenser f adjusting measurement transducer should be operated by the metrology appraisal agency exclusive, whatever structure and model. Troubleshooting also need to be authorized and content by the agency, even to be appraisal and lead seal. Article IV Nozzle Nozzle is a terminal of fuel dispenser’s hydraulic system, which is tool used to refuel into tank and other container. Thus, nozzle should be characterized, by technically, as simple operation, less losses in pressure, stable flow, adjustable, good sealbility and safety. Nozzle includes general nozzle, auto-shut nozzle and nozzle with vapor recovery device. The first type is once widely used in fuel dispenser industry, even still employed currently. With the development and demand in fuel dispenser’s technology auto-shut nozzle become available in manufacturer of fuel dispenser, as this type of nozzle add auto-shut function on the basis of general nozzle. In the current years, some manufacturers have mounted vapor recovery device to nozzle, but its market share is still small. Here introduce them except the last type. General nozzle This kind of nozzle once widely used in filing station is still adapted. 1.1 Structure As illustrated in Diagram 2-27, it consist of nozzle body, main valve, vice valve, nozzle, switch handle. Diagram 2-28 shows exploded drawing. 1-Nozzle body 2-Cap 3-Spring 4-Seal 5-Main valve 6-Assistant valve 7-O-ring 8-Spout 9-Nut 10-Pin axis 11-Switch handle 12-Glang nut 13-Supporing gasket 14-Ejec

ght mean payment ok but loyalty award failure. All of the partial failures　　 unacceptable will have to be fuel dispenser reversed.　　 Failure Complete failure.　　 DeviceUnavailable Complete failure. No further request will be successful because a device is unavailable (e.g.　　 printer)　　 Aborted fuel dispenser Complete failure. The transaction was aborted by cashier or customer or an Abort Request.　　 fuel dispenser TimedOut Complete failure. No response from remote host.　　 FormatError Complete failure. The request cannot be handled or is mistakenly formatted.　　 ParsingError Complete failure. The request XML is not well formed　　 ValidationError Complete failure. The request XML is not validated agains the definition schema　　 MissingMandatoryData Complete failure. The request message is missing necessary data　　 attributes Name Type Use Annotation　　 RequestType DeviceRequestType required Mandatory. See above table for explanation.　　 ApplicationSender ApplicationType required Identifies the application requesting the device　　 service.　　 WorkstationID WorkstationIDType optional Identifies the workstation involved by the response　　 (NOT where the ApplicationSender is running)　　 POPID POPIDType optional Necessary when Point Of Payment is not coincident　　 with Workstation or the ApplicationSender; it is　　

004 and 2005 suggest that the bank is still run principally from London as an investment bank rather than from Frankfurt as a broad wholesale an fuel dispenser d retail institution. That disappoints those in Germany who see Deutsche Bank as the only remaining candidate for a national champion to vie with the likes of UBS, HSBC and Citigroup. Specifically, Deutsche Bank cannot escape the perception that it is directed chiefly by its te fuel dispenser n-strong executive committee, which sits in London and is dominated by investment bankers, and not by its four- m fuel dispenser an management board in Frankfurt. The supervisory board has power of control only over the management board. So Mr Ackermann was pilloried last February for announcing job cuts in Germany within days of producing record results for 2004. The bank was criticised last month when DB Real Estate, a subsidiary, froze customer accounts in a property fund pending a revaluation of the buildings in the portfolio. This was unprecedented in Germany, but Deutsche Bank was surprised by the uproar it caused. It said hurriedly that it would consider compensating some investors. Still, quite a few have consulted lawyers. Unfortunately these events were linked with suspicions that the bank s asset managers, based in New York, had wanted to close the fund and sell the portfolio to private investors. Having reached its profitability target, with the help of share buy-backs of more than ¬12 billion since 2002, Deutsche Bank needs to show that it can put on weight. Its market capitalisation is still only ¬45 billion, or $55 billion, a fraction of Citigroup s $245 billion and HSBC s $185 billion. Its biggest failing has been in institutional asset management, although it has Europe s second-biggest mutual-fund business. Deutsche Bank Asset Management has been losing institutional clients, particularly in London. Mr Ackermann has done well for his shareholders mainly by energising his investment bankers, he has produced the high quarterly returns that he promised. His task now, if he